Hardware and firmware for digital model railways: a DCC command station and track detectors. Work in progress.
The documentation starts with an introduction to RailCom, the DCC feedback channel, and a guide to the RailCom standards and which to read.
Source code will appear on GitHub at github.com/digitalloco; there is nothing there yet.
Latest posts
A DCC-EX EX-CSB1 makes RailCom cutouts, on the development firmware
The ESP32-based DCC-EX command station produces a cutout after every packet on development version 5.9.10. How it was built, how it is switched on, and what the scope shows.
An essential tool: ESU's Profi-Prüfstand decoder tester
A decoder on the bench with a motor, a speaker, every socket and no locomotive in the way. Every bench capture this project has made went through it.
Welcome to digitalloco
What this project is, why there is a site, and what is here so far.